www.CyberData.net
The CyberData SIP-enabled Paging Gateway allows the use of legacy analog zone paging amplifiers when converting to a VOIP system. The Gateway is compatible with most SIP-based IP/PBX servers that comply with the SIP RFC 3261. The Gateway is powered via PoE 802.3af - no external power supply is needed. ~ description via website
Notes on setup in FreePBX using a SIP Extension:
Set Qualify = no to get it to work.
WAudette...
For more information contact;
Bill Majerczak
billm@cyberdata.net
831-373-2601 x-102
An overhead paging speaker that connects direct to Ethernet.
From the Data Sheet:
The CyberData PoE VoIP Speaker is a
Power-over-Ethernet (PoE) and
Voice-over-IP (VoIP) public address
loudspeaker that easily connects into
existing local area networks with a single
cable connection. The speaker is powered
via a standard ethernet cable – no external
power supply is needed. With its small
footprint and low height, the speaker can be
discreetly mounted almost anywhere.
The CyberData SIP-enabled Talk-Back Speakers is a Power-over-Ethernet (PoE802.3af) and Voice-over-IP (VoIP) public address two-way loudspeaker that is easily connects into existing local area network with a single CAT5 cable connection. The speaker is compatible with most SIP-based IP PBX solutions. In a non-SIP environment, the speaker is capable of broadcasting audio through a multicast. It’s small footprint and low height allows the speaker to be discretely mounted almost anywhere. Speakers can be mounted into existing ceilings or in one of our enclosure kits. Enclosure kits offered are beveled wall mount adapters and NEW in 2009 our wall mount adapter with a digital clock perfect for schools.
Gentek
Westcon
888VoIPstore
Neobits
Anixter
VoiPmodo.com
New since last update
Products:
 |  |  |
Cyberdata PoE VoIP Paging Gateway
Cyberdata VOIP GatewayThe CyberData SIP-enabled Paging Gateway allows the use of legacy analog zone paging amplifiers when converting to a VOIP system. The Gateway is compatible with most SIP-based IP/PBX servers that comply with the SIP RFC 3261. The Gateway is powered via PoE 802.3af - no external power supply is needed. ~ description via website
Notes on setup in FreePBX using a SIP Extension:
Set Qualify = no to get it to work.
WAudette...
For more information contact;
Bill Majerczak
billm@cyberdata.net
831-373-2601 x-102
Cyberdata PoE VoIP Speaker
An overhead paging speaker that connects direct to Ethernet.
From the Data Sheet:
The CyberData PoE VoIP Speaker is a
Power-over-Ethernet (PoE) and
Voice-over-IP (VoIP) public address
loudspeaker that easily connects into
existing local area networks with a single
cable connection. The speaker is powered
via a standard ethernet cable – no external
power supply is needed. With its small
footprint and low height, the speaker can be
discreetly mounted almost anywhere.
New in 2009 - VoIP Talk-Back Speaker
^The CyberData SIP-enabled Talk-Back Speakers is a Power-over-Ethernet (PoE802.3af) and Voice-over-IP (VoIP) public address two-way loudspeaker that is easily connects into existing local area network with a single CAT5 cable connection. The speaker is compatible with most SIP-based IP PBX solutions. In a non-SIP environment, the speaker is capable of broadcasting audio through a multicast. It’s small footprint and low height allows the speaker to be discretely mounted almost anywhere. Speakers can be mounted into existing ceilings or in one of our enclosure kits. Enclosure kits offered are beveled wall mount adapters and NEW in 2009 our wall mount adapter with a digital clock perfect for schools.
See Also
Gentek
Westcon
888VoIPstore
Neobits
Anixter
VoiPmodo.com
New since last update